iCertifi: Electrical Certs12.12.82 - App Store

Create professional BS 7671 electrical certificates on your iPhone or iPad - on site, offline, in minutes. Updated for Amendment 4 (A4:2026). iCertifi covers 15 certificate types and is trusted by thousands of UK electricians.

CERTIFICATE TYPES:
. Electrical Installation Certificate (EIC)
. Domestic EIC
. Electrical Installation Condition Report (EICR)
. Minor Works Certificate
. 3 Circuit Minor Works
. EV Charger Certificate (Full EIC)
. Solar PV Certificate (8-part, BS EN 62446-1)
. Electrical Danger Notice
. Earthing & Bonding Certificate
. Electrical Isolation Certificate
. Landlord's Interim Check
. Ventilation Certificate
. Risk Assessment
. Visual Inspection
. EV Charging Risk Assessment

All certificates fully comply with BS 7671:2018 18th Edition + Amendment 4 (A4:2026).

AI-POWERED FEATURES:
. BoardVision AI - photograph a distribution board and auto-populate every circuit, device type, and rating. Supports MCB, RCBO, and AFDD identification
. MFT Scanner - photograph your multifunction tester display and readings are extracted automatically. Supports Megger, Fluke, Kewtech, Metrel, and more
. Circuit Schedule Scanner - scan a paper schedule and import all circuits instantly
. Spark AI Assistant - ask BS 7671 questions while you work

CIRCUIT DESIGNER:
Built-in BS 7671:2018+A4 cable sizing calculator with a guided 5-step wizard:
. Current-carrying capacity with full derating factors (Ca, Cg, Ci, Cc)
. Voltage drop calculations (3% lighting, 5% power)
. Earth fault loop impedance (Zs) validation
. Protective device selection
. 20+ circuit types including EV chargers, solar PV, ring finals, three-phase
. TT system support with 50V/IΔn formula
. Exportable PDF calculation sheet

PROFESSIONAL PDF OUTPUT:
. 10+ EICR presentation templates (Grid, Minimal, Blocks, Classical, and more)
. Custom company branding - your logo, colours, and trading name on every certificate
. Photo-rich observation reports with captions
. Email PDFs directly to clients from the app

QUALIFYING SUPERVISOR (QS) REMOTE SIGNING:
. Send certificates to your QS for review and approval
. Digital signatures applied remotely via iCloud
. Real-time push notifications when approved
. No more chasing paper signatures

OBSERVATIONS & PHOTOS:
. Full observation system with C1, C2, C3, and FI codes
. Attach multiple photos per observation with captions
. Photo gallery embedded in final PDF report

WORKS OFFLINE:
. Create and complete certificates without mobile signal
. All BS 7671 reference tables stored locally
. Syncs automatically when back online

BACKUP & SYNC:
. iCloud sync across iPhone, iPad, and iPad on Mac
. One-tap backup and restore
. Never lose a certificate again

SAVE TIME WITH TEMPLATES:
. Pre-fill distribution board layouts
. Reusable circuit templates
. Clone previous certificates
. Alternative contractor profile for multiple trading names

BUILT FOR UK ELECTRICIANS:
iCertifi is designed exclusively for qualified UK electricians. Every certificate, calculation, and reference is based on BS 7671:2018 (18th Edition Wiring Regulations) with Amendment 4 (A4:2026).

Join thousands of electricians who have made iCertifi their go-to certification tool.

No additional device licences needed. Use on all your iOS devices under one subscription.

iCertifi is free to use in trial mode.
To send, save, print, or export certificates, a subscription is required.
Subscriptions auto-renew unless cancelled in your Apple Account settings.

Other Paid Upgrades Include:
. Built-in backup and restore
. BS7671 AI Assistant
. Zs Calculator
. Top up AI credits as needed (10, 50, or 250 packs)

Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/
Privacy Policy: https://icertifi.zendesk.com/hc/en-us/articles/201659279-iCertifi-s-Privacy-Policy-all-apps-

Version History iPhone held sideways
• The Distribution Boards list and each board page have a sidebar, so circuits, search and Board Vision are all to hand
• Observations show their buttons on the left and the full list on the right
• Observation Details show the codes and their meanings beside the description and photos
• Pressing Done on the circuit page now keeps your place instead of jumping back to the top
• Board Vision opens full screen and upright
• Circuit Designer keeps the box you are typing in above the keyboard
• Mint Books sign in, Certificate Colours and the template list all fit and scroll properly

Zombie Mode
• Zombie Mode is back and improved for October, with a night home screen, lightning, a zombie horde when you shake the phone, and an evil laugh

Settings
• Settings redesigned and is now in clear sections with a search bar, so any option is quick to find

Certificates
• Minor Works and Domestic EIC: a name saved as N/A or left blank now uses the name in Contractor Details
• Minor Works and EICR page 1 print the BS 7671 amendment in full, inside its sentence
• Circuit Designer: fuse 5 second Zs limits and 3 core T&E ratings updated to BS 7671 A4
• Copies and backup restores keep each certificate's due date and Client Hub link

Fixes
• Enterprise unlocks straight away after upgrading from a single user plan
• Faster launch with no freeze at start up
• Lux calc reference no longer closes the app when Domestic is chosen
• On iPad held sideways, one card pages and Observations use the full width 12.12.82 4d ago Spark AI: Improved and more accurate. Also.
- The Spark AI button on the observation screen now opens the chat for the observation you're writing.
- "Add as Observation" now gives the new observation the right item number.
- If you run out of AI tokens, the token shop now opens with prices, from the chat and from the AI checks.
EICR observations
- Items you code C1, C2, C3 or FI on the inspection pages, and failing circuit readings, now appear on the Observations page. Review them and add them in one go.
- "Fill from a finding" on the observation screen fills the observation from any of those items.
- The Vault now opens on its own screen with a search box, and its wording no longer shows stray characters.
- "No Observations" no longer states that no remedial action is required when an observation is already on the report. 12.12.81 Oct 1 What's new
Import PDF: turn a certificate made in another app into an iCertifi certificate. Tap the cog button in Saved Certificates. Your first 10 imports are free.
Auto DB schematics: an optional page showing how your boards are fed. Turn it on in Settings, or for one certificate from the cog menu.
Search circuits on every board from the Distribution Boards page.
Certificate for this repair: start a Minor Works, EIC or Domestic EIC straight from an EICR observation.
Landscape schedule: now looks like the printed schedule, and Max Zs updates when you change the breaker.
Schedule photo scanner is faster and more accurate.

Fixes
PDF preview no longer jumps between pages on iOS 27.
Observation card on iPad is readable in dark mode.
Export ZIP is back at the top of Saved Certificates, in the cog menu. 12.12.80 Sep 28 • Convert keeps your readings: converting a certificate, for example a Domestic EIC to an EICR, now brings across every test result (R1+R2, Zs, insulation, RCD times and more), so there is nothing to type in again.
• EICR item 5.17: the tick box on the heading has gone. Record your outcomes against the four points below it, as on the BS 7671 model form.
• EICR schedule: any box you never filled in now prints N/A, just as the form shows it.
• Before you share: if a certificate has pages you have not opened yet, iCertifi now tells you which ones and lets you open them before sending.
• iPad circuit grid: tapping "Test results" now takes you straight to the readings, and the switch follows you as you scroll.
• Saved signatures: tapping "saved signature" when none is saved on this device no longer clears a signature that is already there. You will see a message telling you how to save one.
• General fixes and improvements. 12.12.73 Sep 25 Circuit test results now keep the same layout on every circuit. The Zs and RCD boxes could swap sides as you moved between circuits, so you had to hunt for the box you had just used.

Scanning a paper circuit schedule with Board vision now waits for large sheets to finish. A big schedule could stop with a message about your internet connection even though the scan was working normally. If the service really cannot be reached, the app now says so plainly. 12.12.72 Sep 22 Bug Fix
• The app could close itself shortly after opening when iCloud was slow to respond, for example on a weak signal. It now opens straight away, every time.

Improvements
• Client Hub waits for your iCloud client list before adding a new client, so a client you added on your other device is never added a second time.
• Changes made on your other device now show up in Client Hub without reopening it.
• Retest reminders are kept in place while your client list is still arriving from iCloud. 12.12.71 Sep 18 EICR OBS
- Fix for users who could not reach observations if the went beyond bounds of screen 12.12.70 Sep 17 iOS 27 Fix

- Fixes a crash that could occur on changing cert reference on iOS 27
- Other fixes 12.12.69 Sep 17 NEW KEYBOARD BAR
• Done now always stays on screen above the keyboard, ready for iOS 27.
• Clear, N/A and Lim sit together in one bar.
• Tap ••• for more quick fills: Ω, MΩ, mA, ms, > 200, PASS, FAIL, C1 to C3, FI, MCB, RCBO, RCD, AFDD, SPD, T&E, SWA and more.

FIND CERTIFICATES FROM iPHONE SEARCH
• Type a client, address, postcode or reference into iPhone Search to find and open a certificate.
• Available to subscribers.

MFT SCANNER
• Reads test instrument screens more accurately.
• If no test result is showing, it tells you and gives your token back.
• For RCD test tables it now picks the slowest x1 trip time.

EIC SIGNATURES
• Each EIC now remembers whether it uses the single signature declaration or the three separate declarations.
• The declaration you do not use prints Not applicable instead of empty boxes. Anything you have already filled in still prints.
• Settings and the declaration page now explain the choice.

SHORTCUTS APP
• New Certificate, Open Certificate, Search Certificates and Retests Due are now actions in the Shortcuts app.

ALSO IN THIS VERSION
• Ready for iOS 27.
• Tips now show on a light yellow card that is easier to see. 12.12.68 Sep 16 - Fixes slow loading saved certs if you have lot of them

- Improves and adds more Quick Fill options 12.12.67 Sep 10 Ring, Radial, Lights, Cooker, Spare, your own saved circuit and More are now a bar you can swipe, right under the circuit's name — no longer n in the Assistant menu. The Assistant has moved onto the start of that bar and stays put while you swipe the rest.

The circuit page now opens showing circuit details and test results together with option to go between the two individually

Scan your test instrument straight into the circuit. There is a camera button on Continuity, Insulation resistance, Zs and RCD test results — point it at your MFT and the reading goes into the right box.

Other improvements and fixes 12.12.66 Sep 9 SAVED CERTIFICATES, REBUILT
• Every row now shows the client, the property address, the certificate type, whether it's a draft, issued or sent, and when the retest is due
• Filter pills: All, Drafts, Issued, Overdue retests, Pinned. Sort by last edited, date created, client, reference, type or retest due. Your choice is remembered
• Search finds anything: client name, address, postcode, reference, board or circuit
• Swipe a certificate for PDF, Duplicate, Convert or Delete. Swipe the other way to Pin it, Mark it sent, or open the client in Client Hub
• Touch and hold a certificate to preview the issued PDF without opening it
• Select several at once to export them as one ZIP, mark them sent, or add the client to Client Hub

RETESTS DUE
• A new screen lists every overdue and upcoming periodic inspection, grouped by client, for the next 30, 60 or 90 days
• One tap sends a ready-written email or text reminder to the client — the certificate remembers it was sent
• The Home screen shows how many retests are overdue or due soon

WIDGET AND SEARCH
• A new Home Screen and Lock Screen widget shows your overdue and upcoming retests at a glance. It replaces the old Today widget
• Ask Siri "Retests due in iCertifi", or find any certificate from the iPhone search screen 12.12.65 Sep 8 Bug fix for potential crash in Minor Works

--- In Previous Version ----

A NEW LOOK FOR EVERY CERTIFICATE
Every page of every certificate has been rebuilt in the clean grouped-card design
• Each section is its own card: white cards on a grey page, grey fields that turn yellow while you type, and a green tick on each card once every field on it is filled in
• Units live inside the field — mm², Ω, MΩ, A, V, kA, mA, ms — so nothing needs a second box
• Short values sit side by side the way you read them: live / cpc sizes, rating / breaking capacity, r1 · rn · r2 on one row
• A new bottom bar: round Back, the certificate menu cog, and a wide blue Next that tells you what the next page is
• You can always reach the foot of a page — the last field no longer hides behind the toolbar
• Dark Mode is back on for the whole certificate editor; printed PDFs stay light
• Every printed page now carries a page number and the same footer — 28 pages had neither

THE CIRCUIT PAGE, REBUILT
• Two halves — Circuit details | Test results — with a header showing the way, designation and device, and the page opens on the half you used last
• One Assistant menu at the top right for Quick Complete (Ring, Radial, Lights, Cooker, Spare, your saved template and More…), Copy / Paste circuit, Save as template, Mark circuit complete, Live Data Sync, Scan Test Instrument and AI Circuit Check
• Test Logic now speaks on the page: an out-of-range reading turns red or amber with a short explanation and Ignore / Check & Retest / Time Delayed buttons right underneath — no more pop-up alerts
• The TT installation reminder (every circuit needs an RCD, Regulation 411.5.2) now appears on EIC, Domestic EIC and EV Charger circuits, not only EICRs

SCHEDULE OF TEST RESULTS GRID
• Turn your iPhone or iPad sideways on a circuit page or the board page and the whole board opens as a spreadsheet: one row per circuit, every column the schedule prints, the same pick-lists as the circuit page, and N/A · Lim · Clear on the keyboard bar
• Return moves down the column and skips spare ways; the No. and designation columns stay put while you scroll sideways; L1 / L2 / L3 rows are tinted; out-of-range readings are coloured by the same rules as the page
• Turn back and the circuit page shows what you typed. On iPad, Detailed View on the board page opens the same grid
• Add circuits with one tap from the + menu: one, a 3-phase group, several at once, a spare, a submain, a template, Board Vision, Design Circuit or Pre-filled circuits

NEW CERTIFICATE PICKER
• New Certificate now opens a searchable list grouped by the kind of work — Installation & Alteration, Inspection & Reporting, Safety, Risk & Isolation, Renewables & Specialist — with every group open. Search by name or by the job: "landlord", "solar", "isolation"
• A Recent strip on the Home screen gives one-tap shortcuts to the last three certificate types you wrote

CLIENTS AND ADDRESSES
• One button beside every address block fills it from Contacts or from your GPS position, on every certificate type
• Contacts import added to the Landlord's Interim Check; the Ventilation Certificate's contacts button works again
• Recent Clients no longer shows N/A placeholders 12.12.63 Aug 31 • iPad: certificate checklist sidebar added
• The circuit page: type of wiring, reference method and points served now sit on one row instead of three full-width boxes
• Dark Mode: a clearer yellow focus ring, a tick you can read, and the last light-only banner fixed
--- In Previous Version ----

A NEW LOOK FOR EVERY CERTIFICATE
Every page of every certificate has been rebuilt in the clean grouped-card design from iCertifi Cloud Pro:
• Each section is its own card: white cards on a grey page, grey fields that turn yellow while you type, and a green tick on each card once every field on it is filled in
• Units live inside the field — mm², Ω, MΩ, A, V, kA, mA, ms — so nothing needs a second box
• Short values sit side by side the way you read them: live / cpc sizes, rating / breaking capacity, r1 · rn · r2 on one row
• A new bottom bar: round Back, the certificate menu cog, and a wide blue Next that tells you what the next page is
• You can always reach the foot of a page — the last field no longer hides behind the toolbar
• Dark Mode is back on for the whole certificate editor; printed PDFs stay light
• Every printed page now carries a page number and the same footer — 28 pages had neither

THE CIRCUIT PAGE, REBUILT
• Two halves — Circuit details | Test results — with a header showing the way, designation and device, and the page opens on the half you used last
• One Assistant menu at the top right for Quick Complete (Ring, Radial, Lights, Cooker, Spare, your saved template and More…), Copy / Paste circuit, Save as template, Mark circuit complete, Live Data Sync, Scan Test Instrument and AI Circuit Check
• Test Logic now speaks on the page: an out-of-range reading turns red or amber with a short explanation and Ignore / Check & Retest / Time Delayed buttons right underneath — no more pop-up alerts
• The TT installation reminder (every circuit needs an RCD, Regulation 411.5.2) now appears on EIC, Domestic EIC and EV Charger circuits, not only EICRs

SCHEDULE OF TEST RESULTS GRID
• Turn your iPhone or iPad sideways on a circuit page or the board page and the whole board opens as a spreadsheet: one row per circuit, every column the schedule prints, the same pick-lists as the circuit page, and N/A · Lim · Clear on the keyboard bar
• Return moves down the column and skips spare ways; the No. and designation columns stay put while you scroll sideways; L1 / L2 / L3 rows are tinted; out-of-range readings are coloured by the same rules as the page
• Turn back and the circuit page shows what you typed. On iPad, Detailed View on the board page opens the same grid
• Add circuits with one tap from the + menu: one, a 3-phase group, several at once, a spare, a submain, a template, Board Vision, Design Circuit or Pre-filled circuits

NEW CERTIFICATE PICKER
• New Certificate now opens a searchable list grouped by the kind of work — Installation & Alteration, Inspection & Reporting, Safety, Risk & Isolation, Renewables & Specialist — with every group open. Search by name or by the job: "landlord", "solar", "isolation"
• A Recent strip on the Home screen gives one-tap shortcuts to the last three certificate types you wrote

CLIENTS AND ADDRESSES
• One button beside every address block fills it from Contacts or from your GPS position, on every certificate type
• Contacts import added to the Landlord's Interim Check; the Ventilation Certificate's contacts button works again
• Recent Clients no longer shows N/A placeholders 12.12.62 Aug 29 Full version

A NEW LOOK FOR EVERY CERTIFICATE
Every page of every certificate has been rebuilt in the clean grouped-card design from iCertifi Cloud Pro:
• Each section is its own card: white cards on a grey page, grey fields that turn yellow while you type, and a green tick on each card once every field on it is filled in
• Units live inside the field — mm², Ω, MΩ, A, V, kA, mA, ms — so nothing needs a second box
• Short values sit side by side the way you read them: live / cpc sizes, rating / breaking capacity, r1 · rn · r2 on one row
• A new bottom bar: round Back, the certificate menu cog, and a wide blue Next that tells you what the next page is
• You can always reach the foot of a page — the last field no longer hides behind the toolbar
• Dark Mode is back on for the whole certificate editor; printed PDFs stay light
• Every printed page now carries a page number and the same footer — 28 pages had neither

THE CIRCUIT PAGE, REBUILT
• Two halves — Circuit details | Test results — with a header showing the way, designation and device, and the page opens on the half you used last
• One Assistant menu at the top right for Quick Complete (Ring, Radial, Lights, Cooker, Spare, your saved template and More…), Copy / Paste circuit, Save as template, Mark circuit complete, Live Data Sync, Scan Test Instrument and AI Circuit Check
• Test Logic now speaks on the page: an out-of-range reading turns red or amber with a short explanation and Ignore / Check & Retest / Time Delayed buttons right underneath — no more pop-up alerts
• The TT installation reminder (every circuit needs an RCD, Regulation 411.5.2) now appears on EIC, Domestic EIC and EV Charger circuits, not only EICRs

SCHEDULE OF TEST RESULTS GRID
• Turn your iPhone or iPad sideways on a circuit page or the board page and the whole board opens as a spreadsheet: one row per circuit, every column the schedule prints, the same pick-lists as the circuit page, and N/A · Lim · Clear on the keyboard bar
• Return moves down the column and skips spare ways; the No. and designation columns stay put while you scroll sideways; L1 / L2 / L3 rows are tinted; out-of-range readings are coloured by the same rules as the page
• Turn back and the circuit page shows what you typed. On iPad, Detailed View on the board page opens the same grid
• Add circuits with one tap from the + menu: one, a 3-phase group, several at once, a spare, a submain, a template, Board Vision, Design Circuit or Pre-filled circuits

NEW CERTIFICATE PICKER
• New Certificate now opens a searchable list grouped by the kind of work — Installation & Alteration, Inspection & Reporting, Safety, Risk & Isolation, Renewables & Specialist — with every group open. Search by name or by the job: "landlord", "solar", "isolation"
• A Recent strip on the Home screen gives one-tap shortcuts to the last three certificate types you wrote

CLIENTS AND ADDRESSES
• One button beside every address block fills it from Contacts or from your GPS position, on every certificate type
• Contacts import added to the Landlord's Interim Check; the Ventilation Certificate's contacts button works again
• Recent Clients no longer shows N/A placeholders

ALSO FIXED
• A single certificate with a missing value could silently stop EVERY save for the rest of the session — fixed, with a repair that fills the blank and a clear warning if it ever happens again
• Add Pre-Configured Board with no template saved no longer creates an empty board that blocks saving
• Circuit Designer: a failed save no longer empties the board
• Duplicated and converted certificates printed their circuits in a random order — fixed 12.12.61 Aug 26 Bug fixes and improvements:
• Fixed: some certificates printed an incorrect "Originally issued under BS 7671:2018+A2:2022" line across the bottom of the page, overlapping the standard footer text. Certificates created before the Amendment 4 update, or duplicated from one, were affected. Your test results and the declaration were always correct — the error was in this one printed line only.
• To correct a certificate you've already issued: open it, tap Revise, then export it again. The corrected PDF keeps its original issue date.
• Client Hub now spots and merges duplicate clients automatically, and prevents new duplicates being created.

Other fixes 12.12.53 Aug 19 iCertifi 12.12.52 — What's New

NEW
Fill test instruments straight from Verifi. iCertifi now connects to Verifi, our test instrument accuracy record app. Tap the gauge button beside any test instrument box on your EIC, Domestic EIC, EV or EICR and pick the instrument — the serial number fills itself, complete with a warning if that instrument's calibration has expired. Set your default instrument the same way in Contractor Details and it pre-fills every new certificate.

Don't have Verifi yet? The gauge button will show you what it does and let you download it free, without leaving iCertifi.

NEW: Client Hub
Every client and certificate in one place. Clients save themselves when you
send a certificate, retest dates appear on their own, and Client Hub can
remind you before each one is due. Tap a client to see their details, what's
due next, and every certificate you've created for them — tap any
certificate to open it, or start a new one right from the client's card.
Clients, notes and retest dates sync across your devices with iCloud, and
certificates created on your other devices are listed on each client too.

IMPROVEMENTS:
• Import client details straight from your Contacts on every certificate
• Fill installation addresses with one tap using GPS
• EICR updated for BS 7671:2018+A4:2026, including extent and location of
sampling and the new schedule tick-boxes
• Clear your remembered circuit designations from Settings
• Redesigned About page with quicker access to help and our other apps

BUG FIXES:
• Fixed rare crashes when saving circuit details, converting certificates
while searching, and exporting the QS signature record on iPad
• Tapping a field no longer fights the auto-fill "N/A" setting
• Mint Books: offline invoices queue reliably and held items no longer
block other work 12.12.52 Aug 11 - Fixes Remarks not showing on final PDF on EICR

- Other fixes

Previous update:

BS 7671:2018+A4:2026 (Amendment 4) Support

* Full Amendment 4 certificate updates.
* New EICR inspection schedules, observations layout, PNB earthing option and additional A4 fields.
* Circuit Designer updated for Amendment 4 requirements.

Issued PDF Archive

* Exported PDFs are now stored as the issued version.
* Revise certificates with a full revision history or issue a replacement certificate.
* Archive control available in Settings.

3-Phase Board Scanner

* Scan TP&N boards with automatic L1/L2/L3 phase detection.
* New full-screen review before import.
* Phase information prints on certificates and exports.

NEW: iCertifi & Mint Books Integration

* Every completed certificate automatically creates a draft invoice in Mint Books.
* Fully integrated bookkeeping, invoicing, quotations and Making Tax Digital compliance.

Also in this update

* Option to open new certificates directly on the Distribution Board page.
* New “NOT SAVED” warning to prevent data loss.
* Printing improvements, bug fixes and performance enhancements.

Important: Please update iCertifi on all your devices. Backups created with this version cannot be restored on older versions of the app. 12.12.51 Jul 20 What’s New

BS 7671:2018+A4:2026 (Amendment 4) Support

* Full Amendment 4 certificate updates.
* New EICR inspection schedules, observations layout, PNB earthing option and additional A4 fields.
* Circuit Designer updated for Amendment 4 requirements.

Issued PDF Archive

* Exported PDFs are now stored as the issued version.
* Revise certificates with a full revision history or issue a replacement certificate.
* Archive control available in Settings.

3-Phase Board Scanner

* Scan TP&N boards with automatic L1/L2/L3 phase detection.
* New full-screen review before import.
* Phase information prints on certificates and exports.

NEW: iCertifi & Mint Books Integration

* Every completed certificate automatically creates a draft invoice in Mint Books.
* Fully integrated bookkeeping, invoicing, quotations and Making Tax Digital compliance.

Also in this update

* Option to open new certificates directly on the Distribution Board page.
* New “NOT SAVED” warning to prevent data loss.
* Printing improvements, bug fixes and performance enhancements.

Important: Please update iCertifi on all your devices. Backups created with this version cannot be restored on older versions of the app. 12.12.50 Jul 16 Fixes
• Fixed alternate contractor details not appearing on some certificates
• Improved background saving
• Other fixes and improvements 12.12.48 Apr 10 - New: OBS (Observation Only) Button

You can now record non-coded observations on your EICRs — items that are noteworthy but don't carry a C1, C2, C3 or FI deficiency code.
A new blue OBS button sits alongside the existing code buttons. Use it for:

- Compliant items worth noting (e.g. "Installation uses pre-harmonised cable colours throughout")
- General comments about the installation condition
- Client advisories that aren't deficiencies
- Positive findings demonstrating thoroughness

On the PDF certificate, OBS items display as "Observation only" in the code column, clearly distinguishing them from coded deficiencies.

- Fixed: Reference Methods A and B were missing from the Circuit Designer installation method picker. Users selecting "Singles in Conduit" cable type could not select these methods, forcing incorrect use of Method C which gives higher (less conservative) current ratings.

Improvement

The reference method picker now dynamically filters to show only valid methods for the selected cable type:
T&E: C, 100, 101, 102, 103
SWA (PVC/XLPE): C, D, E, F
Singles in Conduit: A, B, C, E
MICC: C, E, F 12.12.47 Mar 31 - Improves adding client details from contacts
- bug fixes and improvements 12.12.46 Mar 25 Fix for slow loading saved certificates 12.12.45 Mar 19 Fix: For slow loading of saved certificates for users with large amounts of saved data

Other improvements 12.12.44 Mar 19 - Adds option to scan more than one paper schedule in Board Vision
- Renumbers EICR obs automatically if you delete an observation
- Important bug fix to ensure data saves correctly
- Fix for a sync issue on Mac where iCloud files hadn't fully downloaded 12.12.43 Mar 13